4 x 1 Litre Plastic Bottles in 4G Packaging – ENT-KIT-4X1L
We stock 4 x 1 litre poly combo packaging with a UN rating of UN4G/Y8.3/S. This kit is available with your choice of an amber 1000 ml bottle or a natural 1000 ml bottle. **Please note: No substitutions can be made for these bottles.** The parts of the kit consist of the following:
- VCI77452 Box
- VCI77453 Partition
- VCI77454 Top Tray
Your choice of either the natural or the amber bottles listed below 4 cells in box – 1 bottle per cell:
- BAP800100382
-
- BAP800100373
These kits require the use of Bel Art bottles only for UN compliance.
If you need a 500ml (approx. 16 oz) bottle, you may also use BAP800100381, only 1 bottle per cell, if you fill void space around each bottle so that bottle is secure in each cell.
-
Please note: These kits come unassembled. Assembly instructions are included with the paperwork sent with your order. The instructions are as follows:
UN4G/Y8.3/S/**/USA/+AG0601
Assembly Instructions:
1) Set up one box#VCI77452. Use one of the tested tapes
described in the current +AG0601 COC.
2) Place assembled 4 cell partition#VCI77453 in above box.
3) Place one 1000ml Precisionware wide mouth(53mm) bottle
per cell. USE ONLY MATCHING CAPS SUPPLIED WITH
BOTTLES. Hand tighten caps till fully seated to 40 in-lbs.
We recommend the use of a preset torque wrench, such
as Seekonk’s BT-1R.
Bottles may be bagged in two bags#LDP3467
closed with twist tie or tape, NO CABLE TIES. Bag
closure must be tucked down alongside cap and not
allowed to rest on top. BAGS ARE NOT REQUIRED.
4) Insert top tray#VCI77454 until it rests on top of partition.
5) Seal box as in step #1.
Packages are authorized for compatible products with
S.G. up to 1.7. Bottles have passed a 100 KPA hydrostatic
test. RETEST DUE 5/6/15Tags: 1 litre amber plastic 1 litre natural plastic 1000 ml plastic 4g kit 4g packaging 4x1 litre bottle hdpe bottles linerless polypro caps UN4G/Y8.3/S
Categories: Boxes | combination packaging | plastic bottles