4 x 4 Litre Plastic Jugs in 4G Packaging – ENT-KIT-4X1U
We stock 4 x 4 litre poly combo packaging with a UN rating of UN4G/Y26.6S. This packaging (or kit) consists of the following pieces:
- VCI61280 Box
- VCI61285 Diecut Insert
- VCI04664 Honeycell Brace
- RCC68930-08 4 Litre Center Fill Jug (4 Jugs)
- OBMJ4101B/F422 38439 Acid Cap (4 Caps)
This kit holds 4 jugs per box – 1 jug per cell. These kits require the use of bottle RCC68930-08 with cap OBMJ4101B/F422 for UN compliance.
Please Note: Corrugated is priced separately from bottles and caps.
Bottle and cap prices can be found below:
These kits come unassembled with closing instructions as listed below: UN4G/Y26.6/S/12/USA/+AG0629 NOT CERTIFIED FOR AIR SHIPMENTS. RETEST DUE BY 12/29/14 THE ABOVE KIT CONTAINS THE ITEMS LISTED BELOW Categories: combination packaging
4 Litre / 1 Gallon Natural Plastic Round Center Fill High Density Polyethylene
Item: PBO0004AR00001
UN Rating:
Opening: 38 439
Pack: 22
Foam (F422) Black Plastic Ribbed Sides/Matte Top Acid Cap
Item: PCA0389PS20001
UN Rating:
Opening: 38 439
Pack: 1100
Referred to as an acid cap, this closure is for use on our item PBO0004AR00001. The F422 liner is acid resistant but as always, we suggest testing for compatibility with your product.
49CFR 178.2(c) NOTIFICATION
1) SET UP BOX#VCI61280. INSIDE BOTTOM FLAPS FOLD UP AND IN/OUTSIDE FLAPS PUSH IN TO CREATE 4 CELLS IN LOWER HALF OF BOX. TAPE CENTER JOINT WITH 1 STRIP 3″ REINFORCED GUMMED PAPER TAPE OR 1 STRIP 2″ HEAVY DUTY PS PLASTIC TAPE(MIN. 2.4 MIL THICK). TAPES EXTEND MINIMUM 2.5″ ON EACH SIDE PANEL.
2) PLACE 4 BOTTLES#RCC68930-08 WITH CAPS#OBMJ4101B/F422 IN BOX. HAND
TIGHTEN CAPS.(41 IN-LBS).
3) PLACE HOLD DOWN INSERT#VCI61285 OVER BOTTLES.
4) PLACE HONEYCELL BLOCK#VCI04664 ON TOP OF INSERT#VCI61285 BETWEEN BOTTLES.
5) TAPE TOP FLAPS CLOSED AS IN STEP#1 ABOVE. PLEASE NOTE OFFSET SCORES FOR THESE FLAPS. LOWER SCORE IS INNER FLAP.