5 Gallon and 55 Gallon Composite Tight Head Steel Drums – Poly Liners with a Steel Overpack
Why would you need either a 5 gallon or 55 gallon composite drum? Most likely the main reason would be that your product might not do well in unlined pails or in steel pails that have baked on linings. Corrosive products would be one example. A word on baked on linings can be found on this page. Perhaps you need either an X rated drum or a Y rated drum. Our 5 gallon drum has a UN designation of UN6HA1/Y1.8/100 and our 55 gallon drum has a UN designation of UN6HA1/X1.6/300. An explanation of these ratings can be found below:
UN = United Nations
6 = Composite Receptacle
H = Plastic (Inner Container)
A = Steel (Outer Container)
1 = Tight Head Drum
X = May be used for Packing Groups I, II and III
Y – May be used for Packing Groups II and III
1.8 (5 gallon) 1.6 (55 gallon) – Maximum specific gravity the container has been tested to hold for 5 minutes
100 (5 gallon) 300 (55 Gallon) – Maximum hydrostatic pressure the container has been tested to hold for 5 minutes
You can find more information about these drums in the following articles:
- 55 Gallon Tight Head Steel Composite Drums
- Composite Packaging
- Steel Pails for Water Treatment Chemicals and Corrosive Liquids
These drums may also be used for products that are non-hazardous.
55 Gallon Steel Composite Drum
Tags: 5 gallon composite drum 55 gallon composite drum baked on linings composite receptacle corrosive products hazardous product non-hazardous product plastic inner container poly liners with a steel overpack steel outer container steel tight head drum tight head steel drums with poly liners UN6HA1 x rated drum Y rated drum Categories: steel drums | Steel Pail Linings
55 Gallon Black Steel Round Composite
Item: SDC0055MA2L001
UN Rating: 6HA1/X1.6/300
Opening:
Pack: 1
This is a steel/poly lined composite drum. The inner polyethylene container is blow molded in one piece to help insure product purity.
MOQ 100 Pieces
5 Gallon Steel Composite Drum
5 Gallon Polyethylene 2U Black Steel Round 0.5mm 24 GA Insert 1/8 Vent in Body
Item: SPO0005CS2L001
UN Rating: 6HA1/Y1.8/100
Opening: Open Head
Pack: 36
This black steel pail is a composite pail with a plastic liner. The liners are produced separately from the pail and hand assembled. The pail takes a Rieke Flexspout (sold separately) which must be attached with a special crimping tool. The pail comes with a dust cap which is removed and the pail is then filled. When the Flexspout is applied, it seals the liner to the pail, as well as sealing the spout to the pail. There is small hole in the side of the pail which allows any air between the liner and bladder to be forced out.
UN6HA1/Y1.8/100
Natural Plastic 70mm Flexspout Flexspout
Item: PCA0000RI00011
UN Rating:
Opening: 70mm
Pack: 500
These Rieke Flexspouts must be crimped onto the opening of compatible containers. The crimp on tool is sold separately.